Flexel EcoFloor Underfloor Heating Mat - 200W/m2
We are sorry, this item has now sold out!
Description
Flexel EcoFloor 200W/m2 Underfloor Heating Mat
Combination of self-adhesive mesh with a heating cable pre-attachedMat design enables fast installation and an even heat distribution across the whole floorMats are 500mm wide and available in a range of lengthsMats have a twin conductor cable simplifying installation with a single 3m “cold tail” connectionFinished installation is controlled using an easy to use programmable thermostatAlso available in 160W/m2 heat outputs suitable for internal applications including kitchens, bathrooms & living areasThis 200W/m2 mat is recommended for use in conservatories or areas prone to high heat loss Very simple to install by following the comprehensive instruction booklet included with each cable matPlease Note: The final electrical connections should be made by a qualified electrician in accordance with the current wiring regulationsAll installations require a 30mA RCD (residual current device) for safe operationRooms requiring more than two mats require connection to the thermostat via a standard junction boxIt is recommended that consideration is given to floor insulation as an insulated floor will speed up heat up times and reduce running costs
For Suspended Floors:
When fitting Ecofloor to a timber sub-floor it is essential that you take the standard precautions to stabilise the floor and prevent floor movement. You must always over-board the timber floorboards or chipboard with a surface suitable for tiling. Flexel recommend Ecomax Insulated Tile Backer Board or primed 18mm WBP Plywood.
For Solid Floors:
For best performance it is recommended before fitting Ecofloor you fit a layer of Ecomax Insulated Tile Backer Board. This will minimise heat loss and ensure quicker heat-up times for the floor. Ecofloor can be laid directly onto an un-insulated floor, however this will slow heat-up times, increase running costs and is not recommended.